YANGHUIMIN

  TRY TO RUN SPINDLE WHILE CHUCK NOT LOCK

TRY TO RUN SPINDLE WHILE TAIL NOT LOCK
SPINDLE NEUTRAL GEAR
MAGAZINE ADJUST
HYDRAULIC NOT RUN
SAFETY DOOR BE OPENED
SAFETY DOOR NOT CLOSE
NOT ALL AXIS HAVE GONE BACK REF
IN ADJUST,IGNORE GOING BACK REF
AFTER EXCHANGE TOOL,CYCLE START
ATC MOTOR QF16 OFF
X AXIS IS LOCKED （X 轴被锁定）
Y AXIS IS LOCKED （Y 轴被锁定）
Z AXIS IS LOCKED （Z 轴被锁定）
A AXIS IS LOCKED （A 轴被锁定）
SPINDLE MOTOR FAN QF26 OFF (主轴电机风扇QF26关闭)
SPINDLE ORIENTATION INCOMPLETE （主轴定位不完全）
M FUNCTION NOT COMPLETE （M 功能无法完成）
SPINDLE NOT IN GEAR POSITION （齿轮不在主轴位置）
SPINDLE NOT CHANGED TO LOW GEAR （主轴没有变为低档）
SPINDLE NOT CHANGED TO HIGH GRAR （主轴没有变为高档）
MAG NOT BACKWARD
SPINDLE TOOL NOT CLAMP
SPINDLE TOOL NOT UNCLAMP
MAG NOT IN POSITION
MAG DOES NOT ROTATE
MAG DOES NOT STOP RUNNING
A AXIS HAVE NOT CLAMPED
A AXIS HAVE NOT UNCLAMPED
SET D499=1,"MAG.JOG" SWITCH ON
HYDRAULIC MOTOR QF7 OFF （ 液压马达QF7关闭 ）
HYDRAULIC TEMPRETURE HIGH （ 液压使用温度高 ）

版权声明

“特别声明：以上作品内容(包括在内的视频、图片或音频)为用户上传并发布，本平台仅提供信息存储空间服务。 Notice: The content above (including the videos, pictures and audios if any) is uploaded and posted by the user , the platform merely provides information storage space services.”

本文地址: https://www.amtbbs.org/thread-9783-1-1.html