OPERATING INSTRUCTION -14CONTENTSWarningThanks To The BuyerCautions…2Electrical Safety-3Grounding Device-5Quality Assu rance…5Fault Handing…Magnetic Base Drill Position DescriptionSpare Parts List Exploded Drawing11Operation ManualDESCRIPTIONS OF PRODUCTSWARNINGface andtop face andwidely usedin the building bridge building andship building industriesCAUTIONSTHANKS TO THE BUYERThanks for buying the seriesofmagnetic drillmachine ofPlease readthe operation manual andpay attentiontothe safety precaution.3.Using adr ill bit after clamping.keywrench must be removed,while the drill must be sharp,The right operation,willmake youfully feel our productssuperior perfor mance.for Morse tapershank drillshouldpayattention to the flat irontail at the cone sleevewaistPlease putthis manualina safe place for future reference.4And its operation must be putin the fuselagebehind the cable away fromthe drill bit5.In the switching powersupply,electric and magnetic switch must be in the off positionABOUT THIS MANUAL6.Drilling machine must beused whenusing engine coolantThe use of cooling liquid(soap)The machine model ofthe description in this manual:minutes;B.weightof theplug,thenopen the motor.8.The useof magnetic base drill,must weara seat belt bucklethe machine feed,solossy bit and machine10.Non-magneticmaterials can notdrillwith magneticbase,if thenon-magneticmaterialConfirm the machine model according to the nameplate.piece of steelplate,so that the operating from electric shock danger.1